$15.75

The Pin Swag tire combines the outer lugs of a JConcepts Swagger front tire with the dense arrangement of specialty pins. Optimized as a 2wd front tire with wide body carcass, the pins themselves are round and crisp to the top where they climax to a point. Near the sidewall, the Swag enters with a smooth transition and drops off to a ledge giving steering control. The Swag is split down the center to give a little individual control to contort to surfaces. The wide carcass allows the Pin Swag to mount on standard width 2wd front wheels and provides a large contact patch in the front. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. A unique feature on the Pin Swag, is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue and the geometry gives many edges and ledges to adhere to. Offered in 2.2" bead mounting diameter to fit popular wheels such as the #3347 standard width wheel available in bright white and florescent yellow.